Curtis RCD869 - Preset Memory Stations; Storing Stations with Remote; Storing Stations with Unit

10
Preset Memory Stations
Your CD micro system can store up to 20 preset
radio stations, 10 FM and 10 AM.
Once a station is in a preset memory it can be
retuned by pressing the M-UP/REPEAT button
on either the remote control or the front of the
unit until the desired preset number is
displayed.
To Preset Stations using the Remote
Control
1. Press the Track/Tune buttons to select
the desired frequency.
2. Press the PROG./MEMORY button.
MEMORY will flash on the display.
3. Press the M-UP/REPEAT button until the
desired preset memory number is
displayed.
4. Press the PROG./MEMORY button, to
store the frequency into the selected
memory location. MEMORY will stop
flashing and remain on the display.
The frequency is now preset.
To Preset Stations using the Unit
Controls
1. Press the TUNING +/- buttons to select
the desired frequency.
2. Press the PROG./MEMORY button.
MEMORY will flash on the display.
3. Press the M-UP/REPEAT button until the
desired preset memory number is
displayed.
4. Press the PROG./MEMORY button, to
store the frequency into the selected
memory location. MEMORY will stop
flashing and remain on the display.
The frequency is now preset.