Need help?Do you have a question about the Cyber Suite CYB-KLED and is the answer not in the manual?
General| Brand | Cyber Suite |
|---|---|
| Model | CYB-KLED |
| Category | Keypad |
| Language | English |
Manual covers hardware version 208-4125-020 or higher and firmware 1.00.
Explains the RS485 communication interface and daisy chain configuration.
Details the colour coding of the 10-way wiring loom for keypad connection.
Details the RS485 network connection for multiple keypads and PSU requirements.
Explains connecting up to 4 zone inputs and various wiring configurations.
Describes wiring zone inputs for fire detection units and recommendations.
Details wiring for connecting slave keypads and the available zone options.
Explains the programmable output (PGM) function and its wiring.
Describes controlling slave proximity card reader devices via the keypad.
Details connecting up to 4 other CyberSuite Keypads in Slave Mode.
Explains how to access the device configuration menu upon power-up.
Details setting a unique address for the CyberSuite LED Keypad (1-250).
Configures options like Slave Keypad mode and other reserved settings.
Resets all device options to their default factory settings.
Instructions on how to exit the device configuration mode.
Explains accessing the local installation menu using the default installer code.
Information regarding installer access after module updates or system arming.
Sets the programmable entry delay timer from 000 to 255 seconds.
Sets the programmable exit delay timer from 000 to 255 seconds.
Configures the siren/alarm timer from 000 to 250 minutes.
Configures general options including zone types, power-up behavior, PGM outputs, and trouble beeps.
Configures arming options like fast arming, stay arming, and force arming.
Sets reporting functions for arming, disarming, alarms, and zone bypass events.
Configures panic alarm functions like silent, medical, and fire alarms.
Describes how to enter the zone selection menu and choose a zone to configure.
Explains selecting the zone type (e.g., Disabled, Delay, Follow, Instant).
Configures zone options like bypass allowance, stay zone, and force zone.
Provides contact information for Integrated Control Technology, including address and phone.
To Next Page
