Need help?Do you have a question about the Cybernetics V Series CY-miSAN-V and is the answer not in the manual?
General| RAID Levels | 0, 1, 5, 6, 10, 50, 60 |
|---|---|
| Drive Bays | 12 x 3.5" |
| Supported Drives | SAS, SATA, SSD |
| Connectivity | 1GbE, 10GbE |
| Form Factor | 2U Rackmount |
| Processors | Dual Intel Xeon E5-2600 v3/v4 |
Provides a high-level description of the Cybernetics miSAN-V-Series storage appliance.
Details the hardware and software capabilities of the miSAN-V-Series.
Explains the core functions like network, SCSI, and iSCSI connections.
Describes the two primary methods for configuring and operating the miSAN-V-Series.
Explains the miSAN's ability to receive SNMP messages from a UPS for graceful shutdown.
Lists the necessary prerequisites before installing the miSAN-V-Series.
Provides instructions for installing hardware components and connecting cables.
Details the procedures for setting up network and iSCSI configurations.
Explains the basic setup operations for miSAN-V-Series virtual components.
Covers verifying the installation and the procedure for safely shutting down the unit.
Describes the overall structure of the Web Control Panel interface and its main menu.
Details the Tools, HSTC Options, Information, Browser Links, and Help menus.
Introduces the Devices, Virtual Tapes, Physical Tapes, Jobs, and Messages tabs.
Explains how to manage the miSAN-V-Series disk drives using 3ware Disk Manager.
Describes how to connect to and use the telnet menu system for configuration.
Covers setting up SCSI and iSCSI connections via the telnet menu.
Details maintenance tasks like offline mode and rescanning SCSI buses.
Provides instructions for safely shutting down or rebooting the miSAN-V-Series.
Explains how to log in to the 3ware Disk Manager interface.
Describes the organization and purpose of 3DM's different menus and pages.
Details how to view and change settings that affect units on the controller.
Covers setting preferences like email notification, passwords, and page refresh.
Provides steps for creating new units and configuring RAID levels.
Instructions for safely removing the miSAN-V-Series from its installed location.
Details the correct packing materials and procedures for shipping.
Lists the compatible iSCSI initiators and their required software.
Details the specifications for Ethernet and SCSI parallel interfaces.
Provides physical characteristics and power supply requirements.
Step-by-step guide to download the Microsoft iSCSI Initiator setup.
Instructions for installing the Microsoft iSCSI Initiator driver.
Details on configuring the driver, initiator node name, and target devices.
Explains how to set up service dependencies for iSCSI disk devices.
Information on installing Linux iSCSI initiator and kernel version compatibility.
Configuration details for the Core-iSCSI initiator.
Instructions for setting up iSCSI on Debian, Red Hat, and SuSE Linux.
Guide to compiling from source and testing the Linux iSCSI setup.
Provides definitions for terms used throughout the miSAN-V-Series manual.
Offers answers and solutions to frequently asked questions and problems.
Instructions for reporting and handling shipping damage to new equipment.
Details the return policies for hardware, software, and tape media products.
Outlines the steps required to return products for service or repair.
Provides information and contact details for obtaining technical assistance.
Contains copyright, warranty disclaimers, and trademark notices.
Includes FCC, CSA, GNU GPL, and Apache Software License notices.
To Next Page