Copyright © 2011 CyberPower Systems, Inc.
The CyberPower Step-Down Transformers support installation with power cord L6-30P (OL6KRT2UTF / OL8K10KRT3UTF) or hardwire (OL6KRT2UTFHW /
OL8K10KRT3UTFHW), and are designed for a variety of CyberPower UPS systems. When combined with the UPS, the Step-Down Transformer converts
voltage from 200-240V down to 100-120V.
2U or 3U Step-Down Transformer
User’s manual Registration card
Rackmount left rail Rackmount right rail
Tie plate (1) * 1 set
2U or 3U Rackmount ears (Stands) (2) * 1 set
Flat head screws: M5X8L (8) * 1 set
Pan head screws: M5X12L (12) * 1 set
Plastic washers (8) * 1 set
Screw hole dust covers (10) * 1 set
Input terminal block cover
To Next Page
Loading...