CyberPower RMCARD205 Quick Start Guide

1
INTRODUCTION
Overview
The CyberPower Remote Management Card allows a UPS/ATS
PDU system and environmental sensor to be managed, monitored,
and configured. After installing the hardware and configuring an IP
address, the user can access, monitor, and control the UPS/ATS
PDU from anywhere in the world! Simply use a web browser or SSH
client to access your UPS/ATS PDU. Servers and workstations can
be protected by the UPS utilizing PowerPanel® Business Edition
Client to gracefully shutdown when signaled by the Remote
Management Card.
System Requirements
●
A 10/100Mbps Ethernet connection to an existing network
●
Web Browser or SSH client
●
(Optional) NMS (Network Management System) compliant with
SNMP
Unpacking
Inspect the Remote Management Card upon receipt. The package
should contain the following:
●
CyberPower Remote Management Card
●
RJ45/DB9 Serial Port Connection Cable
●
Quick Start Guide
●
Spare Jumper
●
RMCARD205 Front Panel (with RMCARD305 only)

CyberPower RMCARD205 Specifications

General

AC outlets quantity	- AC outlet(s)
Ethernet LAN (RJ-45) ports	2
Sustainability compliance	Yes
Sustainability certificates	CE, Federal Communications Commission (FCC), RoHS
Country of origin	China
Quantity	1
Product type	Network management card
Product color	Black, Blue
Cabling technology	10/100
Ethernet LAN data rates	10, 100 Mbit/s
Ethernet interface type	Fast Ethernet
Operating altitude	0 - 3000 m
Non-operating altitude	0 - 15000 m
Storage temperature (T-T)	-10 - 50 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	0 - 95 %
Operating relative humidity (H-H)	0 - 90 %
Supported network protocols	IPv4/v6, SNMPv1/v3, HTTP/HTTPs, TCP/IP, UDP, DHCP, NTP, DNS, SMTP, SSH, SSL, TLS, Telnet, FTP, and Syslog
Cables included	Serial

Weight and Dimensions

Depth	76.5 mm
Width	54 mm
Height	36.1 mm
Weight	160 g
Package depth	60 mm
Package width	170 mm
Package height	165 mm
Package weight	300 g
Dimensions (WxDxH)	172 x 60 x 165 mm