CyberPower RMCARD205 Quick Start Guide

Figure 1. The main window of the “Power Device Network Utility” program
4. Select the Remote Management Card you are setting up. Click
on the Tools menu and select “Device Setup” or double click
the Remote Management Card you want to configure.
5. You can modify the IP
Address, Subnet Mask, and
Gateway address for the
Device MAC Address listed in
the Device Network Settings
window, as shown in Figure
2. The factory default IP
Address is 192.168.20.177
and the default Subnet Mask
is 255.255.255.0.
6. Modify the IP, subnet mask or
gateway address. Enter the
new addresses into the
corresponding fields and then
click “Save”.
Figure 2. The Device Network setting window
4
Step 2. Configure the IP Address for the CyberPower
Remote Management Card
Method 1: Using the Power Device Network Utility
1. Install the Power Device Network Utility available for
download at www.CyberPower.com.
2. After installation completes, run the “Power Device Network
Utility”.
3. The main window of the Power Device Network Utility
program is shown in Figure 1. The configuration tool will
display all CyberPower Remote Management devices present
on the local network subnet. The "Refresh" button is used to
search the local network subnet again.

CyberPower RMCARD205 Specifications

General

AC outlets quantity	- AC outlet(s)
Ethernet LAN (RJ-45) ports	2
Sustainability compliance	Yes
Sustainability certificates	CE, Federal Communications Commission (FCC), RoHS
Country of origin	China
Quantity	1
Product type	Network management card
Product color	Black, Blue
Cabling technology	10/100
Ethernet LAN data rates	10, 100 Mbit/s
Ethernet interface type	Fast Ethernet
Operating altitude	0 - 3000 m
Non-operating altitude	0 - 15000 m
Storage temperature (T-T)	-10 - 50 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	0 - 95 %
Operating relative humidity (H-H)	0 - 90 %
Supported network protocols	IPv4/v6, SNMPv1/v3, HTTP/HTTPs, TCP/IP, UDP, DHCP, NTP, DNS, SMTP, SSH, SSL, TLS, Telnet, FTP, and Syslog
Cables included	Serial

Weight and Dimensions

Depth	76.5 mm
Width	54 mm
Height	36.1 mm
Weight	160 g
Package depth	60 mm
Package width	170 mm
Package height	165 mm
Package weight	300 g
Dimensions (WxDxH)	172 x 60 x 165 mm