CyberPower RMCARD205 User Manual

CyberPower Remote Management System
7
Step 2. Configure the IP address for the CyberPower Remote Management
Card
Note: These instructions are for Windows OS. For other OS please refer to Appendix 4.
Method 1: Using the Power Device Network Utility
1. Install the Power Device Network Utility available for download at
www.cyberpower.com.
2. After installation completes, run the “Power Device Network Utility”.
3. The main window of the Power Device Network Utility program is shown in Figure 1.
The configuration tool will display all CyberPower Remote Management devices
present on the local network subnet. The "Refresh" button is used to search the local
network subnet again.
Figure 1. The main window of the “Power Device Network Utility” program.
4. Select the Remote Management Card you are setting up. Click on the Tools menu and
RMCARD305

CyberPower RMCARD205 Specifications

General

AC outlets quantity	- AC outlet(s)
Ethernet LAN (RJ-45) ports	2
Sustainability compliance	Yes
Sustainability certificates	CE, Federal Communications Commission (FCC), RoHS
Country of origin	China
Quantity	1
Product type	Network management card
Product color	Black, Blue
Cabling technology	10/100
Ethernet LAN data rates	10, 100 Mbit/s
Ethernet interface type	Fast Ethernet
Operating altitude	0 - 3000 m
Non-operating altitude	0 - 15000 m
Storage temperature (T-T)	-10 - 50 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	0 - 95 %
Operating relative humidity (H-H)	0 - 90 %
Supported network protocols	IPv4/v6, SNMPv1/v3, HTTP/HTTPs, TCP/IP, UDP, DHCP, NTP, DNS, SMTP, SSH, SSL, TLS, Telnet, FTP, and Syslog
Cables included	Serial

Weight and Dimensions

Depth	76.5 mm
Width	54 mm
Height	36.1 mm
Weight	160 g
Package depth	60 mm
Package width	170 mm
Package height	165 mm
Package weight	300 g
Dimensions (WxDxH)	172 x 60 x 165 mm