CyberPower Remote Management System
71
Save and Restore Configuration Settings
Method 1: Using Web Interface
You can easily save and restore the device configuration to your local PC on
[System->About]
Figure 12. Save/Restore Configuration in the main window.
You can easily save and restore the device configuration to your local PC on the
[System->About], as shown in Figure 12.
To save the configuration file, click “Save” to save the configuration to your local PC. The
text file will have a default format of YYYY_MM_DD_HHMM.txt. To restore a
configuration, click “Browse” to the location of the saved configuration file and click
“Submit” to restore a configuration that has been saved earlier.
Note: Only firmware version 1.1.5 and above support the save and restore configuration
functionality with current UPS and ATS parameter configuration.
Method 2: Using Secure Copy (SCP) command
Use the following steps to restore configuration via SCP.
Note: Only firmware version 1.1.2 and above supports the functionality to restore configuration via SCP.