Install power inlet
1. Insert the new power inlet into the hole in the mounting plate.
Ensure power inlet is positioned correctly.
Qty.DescriptionItem
1Mounting Plate1
1Power Inlet2
2. Connect the three fast-on connectors to the power inlet.
Ensure cables are connected correctly.
Qty.DescriptionItem
1Power Inlet1
1To Ground Stud (Green)2
1To On/Off Switch (White)3
1To On/Off Switch (Black)4
Page 170 of 199
Cybex 525T Treadmill Part Number
To Next Page
Loading...
