CYBEX 525T - Page 183

2. Plug the cables into the MCC board.
MCC board cables
Qty.DescriptionItem
1MYE/BV, Gray1
1CSAFE, Red2
1Console cable3
1Upper display4
1Headphone jack5
1iPod (optional)6
1Heart rate7
1Handset membrane8
1
iPod board assembly (option-
al)
9
1E-stop switch10
Install front cover
Install the four short screws and one long screw securing the front cover and iPad clip to the console
assembly using a Phillips screwdriver.
Qty.DescriptionItem
1Console assembly1
4Short screws2
1iPad clip3
1Long screw4
Update software
Update software using the following procedure.
Complete installation
1. Plug the power cord into the power outlet.
2. Verify the power cord is not being pinched under the front of the treadmill.
Page 183 of 199
Cybex 525T Treadmill Part Number