CYBEX 770T - Page 222

4. Carefully lift handset assembly and unplug the following cables: graphics board (J12), handset
membrane (J9), contact heart rate grips (J7) and the ground wire (located under the MCC board).
Qty.DescriptionItem
1MCC board1
1Graphics board (J12)2
1Handset membrane (J9)3
1Contact heart rate grips (J7)4
Install handset assembly
1. Place handset assembly in position and plug in the following cables: graphics board (J12), handset
membrane (J9), contact heart rate grips (J7) and the ground wire.
Qty.DescriptionItem
1MCC board1
1Graphics board (J12)2
1Handset membrane (J9)3
1Contact heart rate grips (J7)4
2. Route iPod cable through notch in access cover.
Page 222 of 261
Cybex 770T/790T Treadmill Part Number