Assembly
Page 4-4
Cybex VR3 12050 Leg Extension Owner’s Manual
NOTE: It is important that you perform regular inspection and maintenance activities on your equipment.
See the CYBEX Owner’s Manual for inspection and maintenance activities. If you do not have a
CYBEX Owner’s Manual or if you have any questions or concerns, call CYBEX Customer Relations
at 888-462-9239.
9. Verify proper operation
10. Securely anchor machine to the fl oor.
Securely anchor machine to the fl oor using A.
the anchor holes provided in each machine.
NOTE: Cybex is not responsible for the actual anchoring of equipment. Consult with a professional contractor.
NOTE: Use fasteners having a minimum of 500 lbs. tensile capacity (3/8’’ grade 2 bolts or better).
NOTE: If legs/frame does not contact surface, DO NOT pull down with anchors. Shim any leg or
frame not in contact with surface using fl at washers.
To Next Page
Loading...
Need help?
General
