6. Tighten the quick release lever.
7. Spin the wheel to make sure
that it is running smoothly.
Repeat the process until the
wheel and chain are running
correctly.
Checking the tyre pressure
If the tyre is getting soft the blender will not work efficiently. The tyre
pressure should be 40 psi. If the tyre is showing a lot of wear, take the
bicycle to a reputable bike shop to replace the tyre with a 26” hard walled
tyre.
Moving the bicycle around
Standing in front of the handle bars gently balance the bicycle onto the
wheel and push along using the handlebars for steering.
To Next Page
Loading...