33 20-060 Screw, Grounding (Unit of Measure = ea) $ 0.17
34 31-000-ASSY Power Cord Assembly, U.S.A. Standard. (Unit of Measure = each) $ 10.30
34-1 31-810 Grounding Terminal (Unit of Measure = ea) $ 0.17
34-2 31-040 Bakelite Electric Cord Clip (Unit of Measure = ea) $ 0.28
34-3 31-030 Strain Relief, Model 5 and 5C (Unit of Measure = ea) $ 2.00
34-4 31-011 Power Cord, Raw, USA Standard (Unit of Measure = ea) $ 5.25
35 30-020 Switch, Double Pole, Single Throw, 230V, Model 5CE (Unit of Measure = ea) $ 11.90
36 30-030 Noise Suppression Capacitor (Unit of Measure = ea) $ 3.31
37 30-040 RFI Power Line Filter (Unit of Measure = ea) $ 21.17
38 31-815 Terminal, Nylon Female Quick Disconnect (Unit of Measure = ea) $ 0.60
40 31-825 Female Connector (Unit of Measure = ea) $ 0.55
41 ** 30-320 Field, 230V, 50Hz (Unit of Measure = ea) $ 28.00
41 ** 30-320-GR Field, 230V, 50Hz –GR model (Unit of Measure = ea) $ 28.00
42 ** 30-220 Armature, 230V, 50Hz (Unit of Measure = ea) $ 28.00
42 ** 30-220-GR Armature, 230V, 50Hz –GR model (Unit of Measure = ea) $ 58.43
43 10-045-ASSY Motor Case, Model 5CE (Unit of Measure = each) $ 56.00
44 31-025-ASSY Power Cord Assembly, European CE Standard (Unit of Measure = each) $ 14.40
44-1 31-835 CE Grounding Terminal (Unit of Measure = ea) $ 0.45
44-2 31-040 Cord Clip (Unit of Measure = ea) $ 0.56
44-3 31-031 Strain Relief, Model 5CE (Unit of Measure = ea) $ 2.20
44-4 31-012 Power Cord, Raw, European CE (Unit of Measure = ea) $ 11.30
44-5 31-820 Terminal, Nylon Male Quick Disconnect (Unit of Measure = ea) $ 0.60
45 99-900-CUT LENGTH Shrink Wrap, Rear Handle (Unit of Measure = 6 inches) $ 4.85
When ordering please specify Polisher Model Number, Part Number and Part
Description; provide serial number if not sure which version of part is required.
* Used in “old style” polisher (Model 5 serial no. below 73000; Model 5C below
19000). Not compatible with either –GR or current standard motor fields.
** -GR armatures and fields used in these serial number ranges: Model 5, s/n below
86096; Model 5C s/n below 22375 and s/n above 22577; Model 5CE s/n below 31087.
All others use parts without –GR suffix. –GR armatures work with –GR fields only, and
standard armatures work with standard fields only. Do not mix types.
Terms: Prepayment by check, money order or credit card required.
$20 minimum order size.
Freight charges not included.
20% restocking charge on all returned merchandise; returns require RMA.
13
To Next Page
Loading...