The twin heads of the polisher will wear out gradually with use and should be replaced when they no longer hold the polishing
bonnets firmly in position. Simply turn the polisher upside down (so the twin heads are facing up), rest the polisher on a counter or
on your lap. Slide a flat 5/8” wrench between the head and the counterweight. With the wrench in one hand and the head in the
other, twist the head counterclockwise until the threaded shaft is completely clear of the nut. Oil the nut threads slightly and reverse
the above procedure to attach new heads or brushes. Be sure to screw the head of brush straight into the counterweight nut. If the
shaft seems to be screwing into the nut with difficulty, back it out and start over again. Be sure to tighten the heads or brushes
snugly into the nut or the polisher will vibrate badly when in use.
9
Cyclo Toolmakers, Inc. 6 Plus 6 Warranty
Cyclo Toolmakers, Inc. warrants this machine to the original purchaser/user to be free from material or workmanship defects
for a period of 6 months from the date of purchase provided the machine is delivered or shipped freight prepaid to the Cyclo
Factory or a Cyclo authorized repair center. Our obligations under this warranty are expressly limited, at our option, to
replacement or repair of such parts as inspection shall disclose to have been defective and the labor required for installation at
no cost to the original purchaser – freight excluded.
Conditions resulting from misuse, negligence, alterations, accidents, damage caused by improper use of chemicals, or improper
repair by unauthorized parties, or “wear and teat” from normal usage, are not covered.
Any adjustments or replacements of defective parts made under this warranty will not void the warranty, nor will it extend the
original warranty.
For an additional 6 months, Cyclo agrees to share the cost of any necessary replacement part or parts by allowing the purchaser
a 30% discount from list prices on part or parts replaced for a period of 6 months from the date the unconditional warranty
expires.
To Next Page
Loading...