101
Fig. 11.3. Cells Highlighted where we must Insert Values.
Create the Data Logger Template
Run the Cygnus 3 Data Logger Manager software, then:
1. Click on the View Templates button in the toolbar
2. Click on the New Template button
3. You should see the New Template dialog, fig. 11.4.
4. Type in “WTSURVEY” in the Template File Name box
5. Click on Single Point Record Template
6. Change Measurements to 8
7. The New Template dialog should look like fig. 11.4
8. Finally click the Next button.
To Next Page
Loading...