107
Carry out the Survey with the Cygnus 3
Now you can disconnect the Cygnus 3 Gauge from the computer
and create a new Record File using the template we have just
transferred. For details on how to do this see page 57 onwards.
Transfer the Completed Survey Record to Computer
Now we have created Record File(s) on the Cygnus 3 Gauge we
need to copy them back to the computer so we can produce the
survey report. Follow these steps:
1. Turn on the Cygnus 3 gauge and connect it to the computer
with the USB cable.
2. Click on Data Logger in the menu bar (fig. 11.11)
3. Click on Transfer Template to Datalogger.
4. You should see the Transfer Records from Data-Logger
dialog, fig. 11.12.
5. Select the “01000011” Record by clicking on its grey row
selector on the left of the row, see fig. 11.12. We can see this
Record has been created today using the “WaterTankSurvey”
template.
6. Click on the Transfer button to transfer the Record File to
the computer.
7. You should get a message confirming the transfer was
successful.
Fig. 11.11. Data Logger Menu Options.
To Next Page
Loading...