Cygnus 3 - Care and Servicing; Cleaning the Gauge and Accessories

Cygnus 3 Operating Manual
M4-CYG3-M-ENG_Iss2.doc
114
15. Care and Servicing
Cleaning the Gauge
Clean the Gauge and accessories with a damp cloth. Use
water with a mild detergent household cleaner.
Do not use solvents to clean the Gauge.
Do not use any abrasive cleaner, especially on the display
window.
Do not immerse the Gauge in liquid when cleaning.
Batteries
Always remove the batteries if the Gauge will not be used for
more than a few days.
Only use leak-proof batteries, Cygnus recommends Duracell
Procell batteries.
Environmental
Do not immerse the Gauge in liquids.
Do not subject the Gauge to temperatures greater than 60˚C
(140˚F).
Do not store the Gauge for long periods in conditions of high
humidity.
Repairs
There are no user serviceable parts inside the Gauge.
Therefore all repair work should be carried out by Cygnus
Instruments or by an Authorised Cygnus Service centre.