Cygnus 3 - Probe Spares and Membranes

M4-CYG3-M-ENG_Iss2.doc
Cygnus 3 Operating Manual
121
Marinised Probes with Cable Length to Order
For divers taking underwater thickness measurements down to
60m (approx 200ft) maximum whilst keeping the Cygnus 3 on the
surface. Alternatively please visit:
www.cygnus-instruments.com/english/cygnus1uw.html
for full
details on the Underwater thickness gauge.
Part No.
Description
002-9387
Marinised Probe 2.25MHz 13mm (1/2”) UW
remote probe with Lemo 1 plug
002-9388
Marinised Probe 2.25MHz 19mm (3/4”) UW
remote probe with Lemo 1 plug
002-9389
Marinised Probe 3.5MHz 13mm (1/2”) UW remote
probe with Lemo 1 plug
002-9390
Marinised Probe 5.0MHz 6mm (1/4”) UW remote
probe with Lemo 1 plug
002-9391
Marinised Probe 5.0MHz 13mm (1/2”) UW remote
probe with Lemo 1 plug
Lower frequency probes offer better penetration on heavy
corrosion/coatings. Please refer to page 25 for correct
probe selection.
Note: Cygnus 3 is not intended for underwater use.
Probe Spares and Membranes
Part No.
Description
001-3702
Standard Membranes (polyurethane) (20pk)
6mm (1/4”)
001-3701
Standard Membranes (polyurethane) (20pk)
13mm (1/2”)
001-3700
Standard Membranes (polyurethane) (20pk)
19mm (3/4”)
001-4873
Teflon Membranes (10pk) (High Temperature)
6mm (1/4”)