Cygnus 3 - Page 34

Cygnus 3 Operating Manual
M4-CYG3-M-ENG_Iss2.doc
34
2.
Scroll down to GAUGE SETUP
then press OK
3.
Scroll down to BEEP
4.
Press the EDIT key to change
the BEEP setting
5.
The gauge will automatically go
back to the measuring screen.
Setting the Time and Date
The Gauge has an internal clock to maintain the time and date for
the Data-logging functions. When not data logging the current
time is displayed on the measuring screen.
To set the time and date;