Cygnus 3 Operating Manual
Name of spreadsheet template file
The worksheet on the template file
Additional User Fields for extra
Each measurement point contains the following information:
The name of the measurement point
The measured thickness value
The time the measurement was
made
The spreadsheet cell location for the
measurement value
Record File Names
When you first create a new Record File it will need a file name like
any file on a computer. The gauge has two options for getting this
file name:
The user must type in a file name
The gauge creates a unique numeric file
name for you
User Entered File Names
This assumes the user will choose a unique and appropriate file
name. The file name could represent the name or number of the
structure being surveyed.
Auto File Name
The file name is a combination of the GaugeID number and a
sequential 6 digit number as follows:
To Next Page
Loading...