81
Deleting a Record File
You can delete a Record File from the computer by first clicking on
the row selector of the record you want to delete then clicking the
“Delete Record” button in the toolbar. You must then confirm you
wish to delete this record.
Template Files
Template Files allow structured data logging of thickness
measurements when repeatedly surveying identical or similar
objects. A Template File is first created using Cygnus 3 Data
Logger Manager then the file is copied to each Gauge ready for
use.
The data in a Record File produced from a Template file is intended
to be inserted into an Excel
®
Spreadsheet (or it can just be printed
out in a report) so each piece of data has a destination cell
reference – this is the spreadsheet cell the data will be copied into,
i.e. cell ‘D12’.
An XLT file (Excel
®
Template) can be specified to be used as a
template for the Excel document produced. So a company report,
as an XLT file, can be used to create each new blank report
document that will then receive the thickness measurement and
other data collected by the Gauge.
To Next Page
Loading...