83
The vessel name the user types in will be stored against the
‘Vessel Name’ field and be included in the report data.
As the ‘cell ref.’ was also specified the vessel name will be
inserted into the spreadsheet report into cell ‘E20’ on ‘Sheet 1’.
See how this appears on the Gauge screen starting on page 57.
User Field ‘List’ Type
When the User Field type is set to List you must provide a list of
text choices that will be presented to the gauge user. This list can
contain up to 40 items of 16 characters in length.
Measurement Points
Template Files contain measurement points for each thickness
measurement required. Each measurement point consists of a
“Name”, a “Reference Thickness”, a “Minimum Thickness”, a “Cell
Reference” and the “Thickness Measurement” itself.
The “Reference” and “Minimum Thickness” are optional, but when
included they allow wastage calculations in reports and minimum
alarm functions when measuring. See minimum alarm function
starting on page 57.
Creating a Template File
From the Cygnus 3 Data Logger Manager click the ‘View
Templates’ button in the menu bar. The screen will display any
existing templates found, shown in Fig 9.9.
Fig 9.9 Template List
To Next Page
Loading...