Cygnus 3 - Page 88

Cygnus 3 Operating Manual
M4-CYG3-M-ENG_Iss2.doc
88
into
Thickness Measurement Points Tab
No.
Measurement number, 1 to 5000
Name
The name of the measurement point (up
to 15 characters long)
Reference
The reference thickness (100% or
original thickness)
Minimum
The minimum thickness below which an
alert will be raised to the gauge
operator
Cell Ref.
The Excel
®
spreadsheet cell that the
measured thickness value must be
copied into
User Fields Tab