10
6.3 OSD Menu
IN 1280×960 @60 (Input Timing)
Press the Menu button
once to bring up the OSD
and display the input (IN) &
Output (OUT) information.
OUT NTSC (Output TV System)
NTSC Press the Menu button
for 3 seconds to bring
up the OSD then press
it repeatedly to move
the OSD cursor to the
desired selection. Once
the selection is made, if
no button is pressed for a
few seconds, the display
on the OSD will disappear
and the display will output
the selected display
mode.
PAL
Underscan 1
Underscan 2
Overscan
Aspect Adj
Full Screen
Letterbox
Pan & Scan
Auto TV 4:3
Auto TV 16:9
Below is the example of the scan selection result.
4:3
Source TV Underscan1 Underscan2 Overscan
To Next Page
Loading...
