6
1. INTRODUCTION
The PU-444HBTE Matrix enables distribution of four HDMI sources to four
HDBaseT
™
outputs and four HDMI outputs. Each input is independently
routed to any output for maximum source to screen exibility within any
AV system. The four HDBaseT outputs support the transmission of video
(resolutions up to 1080p Full HD and 1920x1200@60Hz), multi-channel
audio, single LAN serving, and control via 2-way IR, RS-232 or Web GUI/
Telnet IP over a single CAT5e/6/7 cable (up to 100m) for each output.
HDMI outputs support the same video resolutions and high denition
audio via certied HDMI cables up to 15m.
The HDBaseT outputs are designed to be used with any compatible
HDBaseT Receiver as follows: PU-507RX / PU-507RX-2H / PU-507RX-SCD /
PU-507WPRX / PU-1109RX. These Receivers support Power over Ethernet
(PoE) function so do not require a separate PSU for power.
Use the LAN serving capabilities of the matrix to add internet connectivity
to every HDBaseT output zone. In addition, this matrix also features IP
control allowing users to access and control the matrix remotely and also
allow additional options for integration of third-party control systems.
2. APPLICATIONS
HDMI system controls
Video/TV wall display and control
Security surveillance and control
Commercial advertising, displaying and control
Lecture room display and control
3. PACKAGE CONTENTS
1 x 4 by 8 Matrix
8 x IR Extender
8 x IR Blaster
x 24V/3.75A DC Power Supply
1 x Remote Control
1 x Operation Manual
To Next Page
Loading...
