8
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
POWER LOCK MENU
OUT
C
3
B
2
A
1
D
4
IN
HGFE
1 2 3 4 5 6
1
LCM: This monitor displays your setting information with each input
and output selection.
2
IR: This IR window accepts the remote control signal of this device
only.
3
Power Button & LED: Press this button to turn ON the device and
the green LED will illuminate when the power is ON. When the LED
illuminate in red it is in standby mode.
4
LCOK: Press this button to lock all the buttons on the panel and the
LED will illuminate. To unlock, just press it again.
5
Menu: Press this button once to select EDID setting from STD(internal)
1 or TV(external) 2 then press it again to conrm the selection. Press
this button every time to conrm the selection.
6
1~4/A~H & OUT/IN button: Press OUT/IN button rst to select the
output/input then press the number button to make the selection
accordingly. For example, output A~B wish to select input 1 and C~E
wish to select input 2. Press OUT
→
A
→
B
→
IN
→
1
→
Menu, and then
press OUT
→
C
→
D
→
E
→
IN
→
2
→
Menu. If the menu button is not
pressed the selection will not be changed.
To Next Page
Loading...
