EasyManua.ls Logo

CYP PU-507RX-2H - Operation Controls and Functions; Front Panel

CYP PU-507RX-2H
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
HDMI OUT 1 HDMI OUT 2
LAN
RS232 OUT
CAT5e/6 to HDMI with LAN/IR/RS232 Receiver
1 2 3 4
1
HDMI OUT 1 & 2:
Connect to HDMI displays for instant image display or cascade with
another family type Transmitter.
2
LAN:
Connect to intra-net or internet service system for a total sharing rate
of 100Mbps within the link of Receiver.
Warning: DO NOT connect this slot with any of the CAT5e/6/7 port,
doing so may trigger a power shut down and may damage the
device.
3
RS-232 OUT:
Connect to a PC/Laptop or RS-232 enabled device (with supplied
3.5mm Phone Jack to D-Sub 9-Pin adaptor) to transmit of RS-232
commands.

Related product manuals