CYP PU-507RX-SCD - Operation Controls and Functions; Front Panel

8
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
XGA
MENU ENTER
- +
720P
SERVICE
HDMI OUT
OPTICAL OUT
2 3 4 5 6 71
1
SERVICE: Reserved for manufacturer use only.
2
IR Receiver window: Receives only the IR signal from the supplied
remote control.
3
OPTICAL OUT: Connect to an amplier or active speakers with an
optical cable.
4
HDMI OUT: Connect to an HDMI TV/Monitor
5
MENU: Press this button to enter the On-Screen Display (OSD) menu.
6
−/+: Use these buttons to navigate down and up in the on-screen
menu.
7
ENTER: Press this button to conrm the selection.
Note:
Pressing '−' (MINUS) and ENTER simultaneously will immediately switch
the output resolution of the device to 720p60.
Pressing '+' (PLUS) and ENTER simultaneously will immediately switch the
output resolution of the device to XGA (1024×768).