6.1 Front Panel
HDMI OUT HDMI IN
RS232 IN
HDMI to CAT5e/6 with IR/RS232 Transmitter
1 2 3
1
HDMI OUT:
Connect to HDMI display for instant image display or cascade
with another family type Transmitter. The unit will detect CAT5e/6/7
output's EDID when it obtain a 4Kx2K EDID and send out the signal
accordingly to other output ports. If CAT5e/6/7 output is without a
4Kx2K's EDID the unit will detect all output's EDID and send out the
signal that all outputs can accept.
This device obtain the last memory function therefore, the device
will use the last CAT5e/6/7 output port's EDID when CAT5e/6/7
output port is not connected after power cycling.
2
HDMI IN:
Connect with source equipment such as DVD/Blu-ray or PS3
player.
3
RS-232 IN:
Connect to a PC/Laptop or RS-232 enabled device (with supplied
3.5mm Phone Jack to D-Sub 9-Pin female adaptor) to transmit of
RS-232 commands.
To Next Page
Loading...
