12
sources can be paired with the video from any HDMI input.
9
DIGITAL AUDIO IN 1~2: Accepts digital audio (LPCM 2.0 only) from
sources such as Blu-ray players, game systems, PCs, etc. These audio
sources can be paired with the video from any HDMI inputI.
10
CONTROL: Connect directly, or through a network switch, to your PC/
laptop to control the unit via Telnet/WebGUI.
11
RS-232: Connect directly to your PC/laptop to send RS-232 commands
to control the unit (refer to section 6.7).
12
SERVICE: Used for rmware service updates in the eld via USB thumb
drive. After connecting a USB thumb drive containing appropriate
rmware, please navigate via the front panel menu to 5-Firmware
→
2-Update
→
YES to begin the rmware update.
13
MAIN 24V & POH 24V: Plug one of the 24V power supplies (included
in the package) into the port marked “MAIN 24V” to power the matrix
unit. If you wish to connect PoH powered HDBaseT receivers to the
matrix, please plug the second 24V power supply into the “POH 24V”
port. This will allow the matrix to provide 48v PoH to all connected
HDBaseT receivers.
6.3 Side Panel
1
1
FAN VENT: These are air ventilation areas. DO NOT block these areas
or cover them with any objects. Please allow adequate space around
the unit for air circulation.
To Next Page
Loading...