25
COMMAND DESCRIPTION
ExtLineOut M Volume=Fast XXX Adjust the volume of an extended
line output in large steps (2dB
steps).
M = 1~2
XXX = “Up” or “Down”
ExtLineOut M Volume=Slow XXX Adjust the volume of an extended
line output in small steps (0.5dB
steps).
M = 1~2
XXX = “Up” or “Down”
ExtLineOut M Delay=XXX Set the audio delay for an
extended line output.
M = 1~2
XXX = 0~230 (units: ms)
ExtLineOut M Mute Mute an extended line output.
M = 1~2
ExtLineOut M Unmute Unmute an extended line output.
M = 1~2
ExtLineOut M Status Display the status of an extended
line output.
M = 1~2
ExtLineOut M Name={NameString} Set the verbose name of an
extended line output. Maximum
32 characters.
M = 1~2
Note: Can only rename one port at
a time. Multi-port is not supported.
To Next Page
Loading...