CYP PUV-1210PL-RX - Page 26

26
COMMAND DESCRIPTION
HDMI_Out M AudioSrc=XXX Set the audio source for an HDMI
output.
M = G~H
Available XXX values:
HDMI_In n [n = 1~6]
OpticIn n [n = 1]
CoaxIn n [n = 1]
AnalogIn n [n = 1~2]
OAR_In n [n = A~F]
FollowVideo
HDMI_Out M Mute Mute an HDMI output’s audio.
M = G~H
HDMI_Out M Unmute Unmute an HDMI output’s audio.
M = G~H
HDMI_Out M VideoSrc=XXX Set the video source for an HDMI
output.
M = G~H
Available XXX values:
HDMI_In n [n = 1~6]
HDMI_Out M VideoSrc=Pattern Set the video source of an HDMI
output to the internal test pattern.
M = G~H
HDMI_Out M VideoSrc=Default Reset the video source of an HDMI
output to the factory default.
M = G~H
HDMI_Out M Mirroring=XXX Set the audio/video mirroring
source for an HDMI output.
M = G~H
Available XXX values:
HDBT_Out n [n = A~F]