CYP PUV-1210PL-RX - Page 27

27
COMMAND DESCRIPTION
HDMI_Out M Status Display the status & properties of
an HDMI output including audio/
video matrix.
M = G~H
HDMI_Out M Name={NameString} Set the verbose name of an HDMI
output. Maximum 32 characters.
M = G~H
Note: Can only rename one port at
a time. Multi-port is not supported.
HDBT_Out M AudioSrc=XXX Set the audio source for an
HDBaseT output.
M = A~F
Available XXX values:
HDMI_In n [n=1~6]
OpticIn n [n=1]
CoaxIn n [n=1]
AnalogIn n [n=1~2]
OAR_In n [n=A~F]
FollowVideo
HDBT_Out M Mute Mute an HDBaseT output’s audio.
M = A~F
HDBT_Out M Unmute Unmute an HDBaseT output’s
audio.
M = A~F
HDBT_Out M VideoSrc=XXX Set the video source for an
HDBaseT output.
M = A~F
Available XXX values:
HDMI_In n [n=1~6]