28
COMMAND DESCRIPTION
HDBT_Out M VideoSrc=Pattern Set the video source of an HDBaseT
output to the internal test pattern.
M = A~F
HDBT_Out M VideoSrc=Default Reset the video source of an
HDBaseT Tx output to the factory
default.
M = A~F
HDBT_Out M Status Display the status & properties
of an HDBaseT output including
audio/video matrix.
M = A~F
HDBT_Out M Name={NameString} Set the verbose name of an
HDBaseT output. Maximum 32
characters.
M = A~F
Note: Can only rename one port at
a time. Multi-port is not supported.
HDMI_In M Status Display the status of an HDMI
input.
M = 1~6
HDMI_In M Name={NameString} Set the verbose name of an HDMI
input. Maximum 32 characters.
M = 1~6
Note: Can only rename one port at
a time. Multi-port is not supported.
SETIP {IP} {Subnet} {Gateway} Set the IP address, subnet and
gateway in Static IP mode.
Address format: xxx.xxx.xxx.xxx
RSTIP Request updated IP information
from the DHCP server.
To Next Page
Loading...