37
6.10 WebGUI Control
Install the Device Discovery Tool
Please obtain the Device Discovery software from your authorised dealer
and save it in a directory where you can easily nd it.
Note: The unit’s default IP address is 192.168.1.50
Connect the unit and your PC/Laptop to the same active network
and execute the Device Discovery software. Click on “Find Devices on
Network” and a list of devices connected to the local network will show
up indicating their current IP address.
By clicking on one of the listed devices you will be presented with the
network details of that particular device. If you choose, you can alter the
static IP network settings for the device, or switch the unit into DHCP
mode to automatically obtain proper network settings from a local DHCP
server. To switch to DHCP mode, please select DHCP from the IP mode
drop-down, then click “Save” followed by “Reboot”.
Once you are satised with the network settings, you may use them to
connect via Telnet or WebGUI. The network information window provides
a convenient link to launch the WebGUI directly.
To Next Page
Loading...