50
6.10.6 Zone A/V Pairing
The zone A/V pairing function allows the end user to control the matrix,
using the supplied remote control, in a customised manner while in
remote rooms (zones) containing an HDBaseT receiver and IR extender.
Each zone can have a dierent set of video/audio sources assigned to the
buttons on the remote control for easy switching. The video and audio
routing selections for each of the six HDBaseT outputs need to be set up
via the WebGUI in advance.
After setting them all up, the end user just needs to press a number
key on the remote control unit once to change the routing status in
whichever zone they are currently occupying. The distinct zone pairings
can also be activated from within the WebGUI or by using Telnet/RS-232
commands.
Quick Button Selection
Please select the HDBaseT output port rst and then click the “edit” icon
(
) to launch the window for further adjustments. The numbers 1~10
and “pattern” correspond to the keys on remote control unit.
To Next Page
Loading...