9
6.2 Rear Panel
1
HDMI OUTPUT: This slot is to connect with HDMI TV/Monitor for
output image display.
2
TOSLINK OUTPUT: Connect to an amplier or active speaker with
optical cable for audio output.
3
AUDIO OUTPUT: Connect to an amplier or active speaker with
3.5mm phone jack for audio output.
4
MENU: Press this button to enter into the OSD menu and press it
again to enter into the selection.
5
+/- button: Press these buttons to
a. move up/down the OSD selection,
b. to adjust the value,
Under normal operation (outside of OSD selection)
c. Press “-“ together with “MENU” to switch output resolution to
720P@60 instantly,
d. Press “+” together with “MENU” to switch output resolution to
XGA@60 (1024×768) instantly
e. Press both “+” together with “-“ to set the device back to factory
reset setting.
To Next Page
Loading...
