page 14 - Smoke Jumper CYPRES 2 User’s Guide -
4. Changing the release unit(s)
After an activation the release unit can be changed
by your rigger packer via the plug-and-socket
connection.
Disconnecting the release unit:
Hold plug and socket by their aluminium grips
and pull them apart using a smooth straight mo-
tion. Do not twist!
Connecting the release unit(s):
Hold plug and socket by their aluminium grips.
Place the plug directly in front of the socket and
connect them by pushing together with a smooth
straight motion until it is completely seated.
Do not twist!
It is easy to change a 1-pin CYPRES to a 2-pin or
CYPRES or vice-versa, by swapping cutter types.
1-pin Cutter
2-pin Cutter
To Next Page
Loading...