page 16 - Smoke Jumper CYPRES 2 User’s Guide -
5. Water contact
Because of the cable housing for the arming cable,
the Smoke Jumper CYPRES 2 is not waterproof.
If a Smoke Jumper CYPRES 2 came in contact
with water, please send it in for a free inspection.
6. Important notes for users
• CYPRES is shielded against radio-transmitter
signals. Extreme concerted efforts have been
taken to protect the Smoke Jumper CYPRES 2
from „radio pollution“. Although the extraor-
dinary shielding system of the Smoke Jumper
CYPRES 2 has been investigated thoroughly,
it is impossible to have 100% pro-tection. It is
still recommended to avoid strong radio-trans-
mitters. Please contact Airtec if you have ques-
tions.
• A release unit that has activated builds up a
high internal pressure and will remain pres-
surized. Never attempt to open it by force. It
can, however, be stored safely for an indenite
period of time, provided that it has not been
damaged.
• To achieve ‘sleep mode’, the arming handle
needs to be pushed gently into the Smoke
Jumper CYPRES 2 until it physically stops.
To Next Page
Loading...