page 20 - Smoke Jumper CYPRES 2 User’s Guide -
At any time it’s possible to check the date of the
next maintenance. (See chapter 3)
If the unit enters 6 months before maintenance
due date, the maintenance
date (next maint. in month
/ year) will automatically
be shown at each selftest.
6 months after the due date
the display will change to:
‘next maint. now’.
All displayed dates are only a reminder.
Please choose a suitable date during the 13 month
time frame for a convenient performance of the
maintenance. According to experience, the num-
ber of maintenances and the necessary time to do
them increases February-May. For quicker ser-
vice, a date between June and January is a better
choice.
The maintenance has to be performed 4 and 8
years after the original date of manufacture. The
earliest possible date for the CYPRES 2 mainte-
nance is 6 months early, the latest 6 months after
the month of manufacture.
A delayed maintenance has no advantage. It does
not save any cost as the Lifetime Warranty re-
mains the same. It’s smart to choose a suitable
time during the 13 month window for sending the
unit in for maintenance, rather than waiting until
the last possible moment, or until the beginning of
the next season.
Because of the 134,000+ maintenance proce-
dures performed to date on CYPRES, and lots
of improvements incorporated into the design of
CYPRES 2, Airtec has determined that it is pos-
sible to extend the maintenance window to 13
months on
CYPRES 2. This maintenance window
gives you more freedom, and avoids maintenance
down-time at the wrong time of the year - please
use this new feature wisely!
To Next Page
Loading...