To Next PageTo Next Page
Need help?Do you have a question about the D.A.S. Action 12A and is the answer not in the manual?
General| Frequency Response | 50 Hz - 20 kHz |
|---|---|
| Max SPL | 126 dB |
| Woofer | 12" |
| Tweeter | 1" |
| Weight | 14.5 kg |
| Frequency Range (-10 dB) | 50 Hz - 20 kHz |
| Amplifier Power (Continuous) | 500 W |
| Amplifier Power (Peak) | 1000 W |
| LF Driver | 12" Woofer |
| Enclosure Material | Polypropylene |
| Color | Black |
| Input Connectors | XLR, TRS |
| Sensitivity | 96 dB |
| Maximum SPL | 126 dB |
| Type | Active Speaker |
| Power | 1000W (Peak) |
| HF Driver | 1" |
| AC Input | 100-240 V |
Class A product and required environmental conditions (E1-E4) for safe operation.
Ensures safe electrical connections, grounding, and protection against voltage hazards.
Covers proper installation, temperature, humidity, and protection from elements.
Guidance on safe mounting, user-serviceable parts, and cleaning procedures.
Details the 24-month warranty against manufacturing defects and conditions.
Specifies that only authorized centers perform repairs; shipping costs are buyer's responsibility.
Outlines requirements for claiming warranty service, including invoice copy.
Confirms adherence to Low Voltage, EMC, RoHS, and WEEE directives.
Lists compliance with relevant European safety and electromagnetic compatibility standards.
Highlights the series' sound quality, build, reliability, and user convenience.
Details the specifications and design of the action 12A and M12A models.
Outlines the technical specifications and features of the action 15A powered loudspeaker.
Details the specifications and design of the action 215A loudspeaker.
Describes the design and functionalities of the action 18A subwoofer.
Outlines the technical specifications and features of the action 218A subwoofer.
Diagram illustrating a 2x action 15A (or 12A) speaker system with DSP-26.
Diagram showing an action 18A subwoofer paired with two action top speakers.
Diagram showing an action 18A subwoofer with two action top speakers using TRD-6 stands.
Diagram showing an action 218A dual subwoofer system with two action top speakers.
Diagram illustrating a system with two action 215A loudspeakers connected to a DSP-26.
Diagram showing a setup with four action M12A stage monitor loudspeakers.
Presents dimensional drawings (bottom, front, right, rear, top) for all action series speakers.
Details the various input and output connectors on the amplifier panels.
Explains the function of LEDs, level knobs, and response switches.
Covers unique controls like THRU/HPF, LINE SELECT, FUSE, and AC OUTPUT.
Guidance on sequential power-up, shutdown, and disconnection.
Describes how LIMIT LEDs and thermal protection work.
Recommendations for EQ settings and behavior during low mains voltage.
Provides a table detailing current draw for different models and voltages.
Addresses problems related to the absence of sound or signal indication.
Resolves problems with power output, sound distortion, and overload indicators.
Guides on eliminating hum, buzz, and interference from other equipment.
Troubleshooting steps for when the unit's ON LED does not illuminate.
Detailed technical data for the M12A, 12A, and 15A loudspeakers.
Detailed technical data for the 215A, 18A, and 218A loudspeakers.
Critical safety information and user responsibilities for flying systems.
Details the internal rigging points and use of eyebolts for suspension.
Explains eyebolt installation, ANL-2 set, and working load limits at different angles.
Explains unbalanced and balanced audio signal transport and connectors.
Illustrates various audio cable connection methods for optimal signal transfer.
