Need help?Do you have a question about the D.A.S. AERO-38 series and is the answer not in the manual?
General| Brand | D.A.S. |
|---|---|
| Model | AERO-38 series |
| Category | Speaker System |
| Language | English |
Essential safety warnings and operating instructions for user protection, covering both Spanish and English versions.
Introduction to the D.A.S. Audio AERO series, its applications, and key features like coverage and SPL.
Detailed description of the AERO-38 module, including transducers, enclosure geometry, and materials.
Critical safety warnings and guidelines for flying and rigging the acoustic system, emphasizing user responsibility.
Description of rigging structures, guides (G1A48, G2A48), and accessories used for flying and stacking.
Details on AX-AERO48/AX-AERO38 flying grids and chain hoists for safe array suspension.
Information on PL-48 and PL-38 dolly panels used for transporting and facilitating the flying of systems.
Description of the PL-48S platform for transporting and stacking AERO-38 units in various configurations.
Details on the AX-COMBO adapter used for connecting AERO-28 units as downfill systems.
Explanation of quick release pins used in the rigging system for secure connections and adjustments.
Defines safety factors for load limits and flying operations, ensuring system integrity and preventing accidents.
Description of the AERO-38A amplifier panel, including indicators, connectors, and power controls.
Information on AERO-182A and AERO-218A low frequency self-powered systems and their amplifier panels.
Details AC power requirements and current draw for powered models like AERO-38A, AERO-182A, and AERO-218A.
Recommended sequential procedure for powering sound systems on and off to prevent damage.
Guidance on managing overload indicators and understanding overheating protection mechanisms.
Describes input/output connections, signal routing, and loop-thru functionality for the AERO-38A.
Instructions on using rain protectors for outdoor installations to prevent damage from moisture.
Step-by-step guide to convert a passive AERO-38 system to an active AERO-38A system.
Guide to convert passive AERO-218Sub to active AERO-218A, including speaker polarity changes.
Solutions for common problems like no sound, distorted sound, or signal presence indicator issues.
Troubleshooting steps for hum/buzz, and power indicator problems, including fuse replacement.
Methods for transporting cabinets and the importance of planning and inspecting rigging components.
Procedure for assembling an array one unit at a time using the AX-AERO48/AX-AERO38 grid.
Procedure for assembling an array using the PL-38 platform for easier transport and setup.
Guide for assembling arrays using the PL-48S platform for stacking and flying configurations.
Procedure for assembling a six-box cluster using the PL-48S platform for efficient setup.
Steps for lifting the assembled cluster and detaching the PL-48S platform.
Guidance on positioning and connecting subsequent boxes in the cluster assembly.
Steps for setting splay angles between boxes in a cluster using safety pins and rigging hardware.
Recommendations for subwoofer units (AERO-218Sub, AERO-182) in external amplification systems.
Subwoofer integration with self-powered AERO-38A systems, including necessary signal processing (DSP-1Sub).
Steps to remove the front grill for accessing 12" speakers and 12GNC drivers for service.
Procedure for accessing 10" speakers and the high-frequency driver by removing plates.
Guide to identify speaker wires by color code for correct connections during maintenance.
Detailed specifications for AERO-38A (powered) and AERO-38 (non-powered) models.
Detailed specifications for AERO-182A (powered) and AERO-182 (non-powered) models.
Detailed specifications for AERO-218A (powered) and AERO-218 Sub (non-powered) models.
Instructions and recommended usage of the DSP-3VS processor for signal management and presets.
Formulas and guidelines for calculating and setting amplifier limiter levels for optimal performance.
Wiring diagram and operating parameters for an external amplification system using AERO-38 and AERO-182.
Wiring diagram and operating parameters for an external amplification system using AERO-38 and AERO-218Sub.
Wiring diagrams for self-powered systems with AERO-38A and AERO-182A units.
Wiring diagrams for self-powered systems with AERO-38A and AERO-218A units.
Explanation of transporting audio signals using unbalanced and balanced line types, including connector differences.
Recommended connections using various connector types (XLR, Jack, RCA) for audio signals to processors/amplifiers.
To Next Page
