53
Using the AP Manager (continued)
Device Configuration>AP Mode
• Access Point: The default setting used to create a wireless LAN.
• WDS with AP: Allows you to connect multiple wireless LANs together,while still functioning
as an AP.If enable, you must enter the MAC address of the other DWL-2100APs.
• WDS: Allows you to connect mulitple wireless LANs together. All other LANs must be
using DWL-2100APs.When enable , you must enterthe MAC address of the other
DWL-2100APs.
• AP Repeater: Allows you to repeat the wireless signal of the root access point. When
enabled you must enter the MAC address of the root access point.
• AP Client: Allows any device with an Ethernet connection to connect to the wireless
network via another DWL-2100AP, such as a printer, gaming console (Xbox, PS2), or
a computer. You will need to enter the SSID of the DWL-2100AP that is functioning as
an AP.
To Next Page
Loading...
