Technical Support Setup Procedure
Page | 1
How to configure DAP-1365 as Access Point with non-
default wireless SSID?
(Note: Please ensure the device LED is blinking orange colour before you do setup.
If it is not blinking in orange colour, follow the guide on page 4 on how to reset the device
before follow the guide to setup.)
Step 1: Copy down the wireless name and password that was on the sticker of the device.
Step 2: Plug DAP-1365 direct to power outlet.
Step 3: Click on the Computer Icon on the right bottom side of the Windows.
Step 4: Select the Wireless network name that was copy down.
To Next Page
Need help?
General
