DCS-700L
6
English
Mounting your camera (optional)
• Use a 6mm drill bit to drill two holes 36mm
apart, and at least 30mm deep.
36mm
30mm
• Place the mounting holes on the base of the
camera over the screws as shown, then slide
the camera down to mount the camera.
FCC ID: KA2CS800LA1
IC: 4216A-CS800LA1
CAN ICES-3 (B)/NMB-3(B)
Model: DCS-800LA1
DCS- 8 0
0
L
• Use a mallet to insert the wall anchors into the
holes.
• Screw the included screws into the wall
anchors.
To Next Page
Loading...
