D-Link DES-1210-28/ME - Page 64

DES-1210-28/ME Metro Ethernet Managed Switch CLI Reference Guide
52
Command Parameter
create snmp host
<ipaddr> [v1 <username 32> | v2c <username 32> | v3 [noauth_nopriv |
auth_nopriv | auth_priv] <username 32>]
delete snmp host <ipaddr>
show snmp host {<ipaddr>}
enable trusted_host
disable trusted_host
create trusted_host
<ipaddr>{network <network_address>} {application [telnet | ssh | snmp | http |
https | ping | all}
show trusted_host
delete trusted_host [<ipaddr> | all | network <network_address>]
enable snmp traps
disable snmp traps
enable snmp
authenticate trap
disable snmp
authenticate trap
show snmp traps
config syslocation <string 20>
config sysname <string 20>
enable snmp
disable snmp
enable snmp
DHCP_screening traps
diable snmp
DHCP_screening traps
enable snmp
IMPB_violation traps
disable snmp
IMPB_violation traps
enable snmp
fiber_port_link traps
disable snmp
fiber_port_link traps
enable snmp
firmware_upgrade_state
traps
disable snmp
firmware_upgrade_state
traps
enable snmp LBD traps