D-Link DES-1210-52/ME - Config Snmp Engineid; Show Snmp Engineid

DES-1210-52/ME L2 Metro Ethernet Switch CLI Reference Guide
83
characters that is used to identify members of an SNMP community.
This string is used like a password to give remote SNMP managers
access to MIB objects in the Switch’s SNMP agent.
Restrictions
None.
Example usage:
To display the currently entered SNMP community strings:
DES-1210-52/ME:5# show snmp community
Command: show snmp community
SNMP Community Table
(Maximum Entries : 10)
Community Name User Name
------------------------ ----------------
public ReadOnly
private ReadWrite
Total Entries: 2
DES-1210-52/ME:5#
config snmp engineID
Purpose
To configure a name for the SNMP engine on the Switch.
Syntax
config snmp engineID <snmp_engineID 64>
Description
The config snmp engineID command configures a name for the
SNMP engine on the Switch.
Parameters
<snmp_engineID 64> − A string, of between 10 and 64
alphanumeric characters, to be used to identify the SNMP engine on
the Switch.
Restrictions
Only administrator, operate or power user-level users can issue this
command.
Example usage:
To give the SNMP agent on the Switch:
DES-1210-52/ME:5# config snmp engineID 12345678900
Command: config snmp engineID 12345678900
Success.
DES-1210-52/ME:5#
show snmp engineID
Purpose
To display the identification of the SNMP engine on the Switch.
Syntax
show snmp engineID
Description
The show snmp engineID command displays the identification of
the SNMP engine on the Switch.