D-Link DES-1210-52/ME - Enable Snmp LBD Traps; Disable Snmp LBD Traps

DES-1210-52/ME L2 Metro Ethernet Switch CLI Reference Guide
104
Description
The disable snmp firmware_upgrade_state traps command
disables SNMP firmware upgrade state traps support on the Switch.
Parameters
None.
Restrictions
Only Administrator or operator-level users can issue this command.
Example usage:
To disable SNMP firmware upgrade state traps support on the Switch:
DES-1210-52/ME:5# disable snmp firmware_upgrade_state traps
Command disable enable snmp firmware_upgrade_state traps
Success.
DES-1210-52/ME:5#
enable snmp LBD traps
Purpose
To enable SNMP LBD traps.
Syntax
enable snmp LBD traps
Description
The enable snmp LBD traps command enables SNMP LBD traps
support on the Switch.
Parameters
None.
Restrictions
Only Administrator or operator-level users can issue this command.
Example usage:
To enable SNMP LBD traps support on the Switch:
DES-1210-52/ME:5# enable snmp LBD traps
Command: enable snmp LBD traps
Success.
DES-1210-52/ME:5#
disable snmp LBD traps
Purpose
To disable SNMP LBD traps.
Syntax
disable snmp LBD traps
Description
The disable snmp LBD traps command disables SNMP LBD traps
support on the Switch.
Parameters
None.
Restrictions
Only Administrator or operator-level users can issue this command.
Example usage:
To disable SNMP LBD traps support on the Switch:
DES-1210-52/ME:5# disable snmp LBD traps
Command: disable snmp LBD traps