D-Link DES-1210-52/ME - Enable Dhcp_Local_Relay; Disable Dhcp_Local_Relay

DES-1210-52/ME L2 Metro Ethernet Switch CLI Reference Guide
121
Command: show dhcp_relay
DHCP/BOOTP Relay Status : Enabled
DHCP/BOOTP Relay Enable Portlist : 1-52
DHCP/BOOTP Relay Enable VID List : 1,
DHCP/BOOTP Hops Count Limit : 12
DHCP/BOOTP Relay Time Threshold : 0
DHCP Relay Agent Information Option 82 State : Enabled
DHCP Relay Agent Information Option 82 Check : Disabled
DHCP Relay Agent Information Option 82 Policy : Replace
DHCP Relay Agent Information Option 82 ID
DHCP Relay Agent Information Option 82 Circuit ID Type : Default
DHCP Relay Agent Information Option 82 Remote ID Type : Default
Interface Server 1 Server 2 Server 3 Server 4
--------- --------------- --------------- --------------- ---------------
System 10.90.90.95
DES-1210-52/ME:5#
enable dhcp_local_relay
Purpose
To enable the DHCP local relay feature globally.
Syntax
enable dhcp_local_relay
Description
The enable dhcp_local_relay command enables the DHCP local
relay feature on the Switch.
Parameters
None.
Restrictions
Only Administrator, operator or power user-level users can issue this
command.
Example usage:
To enable the DHCP Local Relay:
DES-1210-52/ME:5# enable dhcp_local_relay
Command: enable dhcp_local_relay
Success.
DES-1210-52/ME:5#
disable dhcp_local_relay
Purpose
To disable the DHCP local relay feature globally
Syntax
disable dhcp_local_relay
Description
The disable dhcp_local_relay command disables the DHCP local
relay feature on the Switch.